Epoxy Coatings

AY&B Epoxy Resin

General Purpose High performance Epoxy Resin Used for: Altex Epoxy Resin may be mixed with either Altex Microballoons, or General Purpose Thickener to provide site mix fairing, gap filling glue and coving compounds.   Easy mixing  -  4 : 1 ratio by volume Excellent cure characteristics with a good “tail” read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Bond 3094

Altra~Bond 3094® is a two component, Strontium Chromate based epoxy primer designed for use on aluminium structures, sheets and extrusions and galvanised substrates. It has Excellent adhesion and anti- corrosive properties Fast dry to recoat Compatibility with high performance epoxy and urethane systems Altra~Bond 3094® is ideal as A primer read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Lock 576

Altra~Lock® 576 is designed for use as a surface  sealer, conditioner and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods. May be overcoated with a wide range of build and/or finish coats.   Altra~Lock® read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Shield 2000

Altra~Shield® 2000 is a high performance, multi-purpose high build epoxy coating available in a wide range of  tinted pastel colours. Altra~Shield® 2000 is recommended for use: On general exterior structural steel where an economical and aesthetic pleasing high performance finish is required. Superior colour stability in exterior exposures as compared read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Shield 2024

Altra~Shield® 2024 is a high performance, hard wearing two-component high build epoxy ideally suited for use on industrial structures, fabricated equipment and industrial flooring. Altra~Shield® 2024 is ideally suited: As a floor coating for food & chemical processing, as well as workshops and industrial facilities. Altra~Shield® 2024 is an easy clean finish, available read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Shield WB-V Primer Finish

Altra~Shield ® WB-V is a two pack low VOC waterborne epoxy. The cured film presents a non-yellowing finish with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces.  Self-priming over concrete, plaster and fibre cement substrates Very good read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Altra~Tar

Altra~Tar® may be used in all Industrial & Marine applications where coal tar epoxy coatings are traditionally specified. Marine & Immersion Service Ships, barges, floating docks, offshore structures - Non-bleeding formulation makes Altra~Tar® equally suited to under and above water service Economical anti-corrosive & barrier coating under anti-foulings Industrial clarifiers read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 1209

Carboguard 1340

Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 2929

Proprietary cross-linking epoxy-acrylic gloss finish Fast cure iso-cyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable. Isocyanate free Early through-curing Excellent colour and gloss retention with good chalking resistance Lead and chrome-free colour range Good chemical resistance Excellent durability read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 504

Carboguard® 504 is an inert non-inhibitive anti-corrosive modified polyamide cured epoxy primer. Excellent primer for water and many aqueous chemicals immersion service when top-coated with an approved finish Excellent adhesion to difficult substrates Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 504 ZP

Carboguard® 504 ZP is a zinc phosphate modified inhibitive anti-corrosive polyamide cured epoxy primer Carboguard® 504 ZP may be applied over suitably prepared mild steel, non-ferrous metals and other substrates as specified Excellent adhesion Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 510 (Trowel Grade)

An economical trowelable, waterborne epoxy patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for patching spalled concrete and masonry wall surfacing to accept subsequent topcoats. Carboguard 510 repairs damaged concrete, fills large cracks, and can be used as a read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Carboguard 510 SG (11.5L mix)

A spray-grade, economical, epoxy-based repair mortar, patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for resurfacing deteriorated concrete in wastewater environment. Topcoated with Carboline’s lining systems provides protection from acid attack from H2S or MIC. Unique spraygrade (SG) formulation read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 635

An all purpose epoxy coating that has a variety of attributes including low temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 can be used direct to metal as a corrosion resistant primer or as an intermediate coating over primers. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 635 HAR

A rapid cure to topcoat epoxy with high abrasion resistance along with other valuable attributes including: low-temperature cure surface tolerance fast recoat times moisture tolerance during application and cure excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 635 TMS Seal Coat

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

Carboguard 636

A highly versatile multi-purpose Phenalkamine Epoxy High Build coating. Carboguard® 636 is an advanced technology coating suited to marine and industrial applications and suitable for atmospheric and many immersion exposures. The DTM properties make Carboguard® 636 a versatile coating in maintenance and new work applications. Syntactic foam modification gives Carboguard® read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 640

Carboguard® 640 is a high performance, two-component, modified phenalkamine, chemically cured, immersion grade epoxy barrier coating Carboguard® 640 is an ideal high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required. Carboguard® 640 has excellent proven long-term service case histories for marine read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690

High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Fully tintable epoxy high build Suitable for all industrial and marine environments. Carboguard 690 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690 GF

Phenalkamine Epoxy with Glass Flake Additive to increase chemical, abrasion & thermal shock resistance High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690 Non-Skid

Phenalkamine Epoxy with Non-Skid Additive High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used as required on decks, walkways etc read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Carboguard 695 PM

Carboguard 695 PM is a solventless, epoxy surfacer or patching mortar that is used to: Fuel & Other Tanks: Transition between floor-wall chine areas, lapwelded plates, rivets, etc. It is typically used with a reinforced mat system specifically designed to comply with API RP652 for thick-film tank bottom lining repairs. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 696 HBE

Carboguard® 696 HBE is a phenalkamine cured high solids, syntactic foam modified high build epoxy coating Carboguard® 696 HBE is designed for single coat application as a penstock lining to film thicknesses typically ranging between 400 & 600 microns using correctly equipped industry standard airless spray equipment of sufficient capacity. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 696 UHBE

Carboguard® 696 UHBE is a phenalkamine cured, high solids, syntactic foam modified high build epoxy coating. Carboguard® 696 UHBE is designed for application to system film thicknesses typically ranging from 800 microns to 3 millimetres (3000 microns). Ultra-High Build – 0.8mm to 2 mm in a single coat Potable Water read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 881

Carboguard 890

Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions Excellent chemical resistance Surface read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  Aus. Safety Data Sheet

Carboguard 890 GF

Cycloaliphatic Amine Epoxy with Glass Reinforcement A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 893

High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 893 SG

Carbomastic 18 BT

Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks. Offshore applications include sub-sea, jackets, production decks, drilling rig legs, read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbomastic 615 Aluminium Grey

This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal. It contains read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbomastic 615 MIOX

This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal. It contains read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboxane 2000

Carboxane 2000 is a premium, ultra-durable coating that provides outstanding gloss and colour retention for exterior exposures. Carboxane 2000 combines the chemical resistant properties of epoxies and polysiloxanes with the weathering characteristics of premium acrylic-polyurethanes. This tightly cross-linked film results in a finish with outstanding barrier properties and weathering performance. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboxane 2000 Satin

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

Glass Flake Additive

Reinforcing additive for a range of Carboguard epoxy coatings read more »

Availability: - New Zealand - Australia

View More  Enquire  NZ Safety Data Sheet  Aus. Safety Data Sheet

Multi-Gard GP 33AU

Two component Epoxy. Corrosion and water resistant high performance, chemically cured, sandable epoxy coating, It can be used as a tie-coat over suitable prepared, aged epoxies and polyurethanes, or can be applied as a high build sandable epoxy to remove minor defects from the surface to be coated. Suitable for read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Rustbond

Rustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and will accept a variety of topcoats. Recommended use as primer/sealer for marginally prepared steel and over old coatings. The excellent wetting properties allows it to penetrate rust and discontinuities read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

ZECA Primer

A specialised primer for below waterline applications on aluminium hulled commercial vessels.   May only be specified by Altex Technical Services Dept. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet