Fireproofing

view case history

A20 Accelerator

Alunimium sulphate accelerator for Southwest Type 5GP sprayed cementitious fireproofing read more »

Availability: - New Zealand - Australia

View More  Enquire  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 1340

Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Firetex FX2003

This solvent borne intumescent is applied to steel for fire ratings up to 120 minutes, and is designed to be used in exterior systems. (typically overcoated with Fire~Lock Sealer and polyurethane finish coats)   Single pack, rapid touch dry Builds in excess of 1,000µm per coat Applied using industry standard read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Intumastic 285

Single package, water-based, flexible mastic fire protective coating for cables and cable trays. A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

NULLIFIRE SC801-120 Water-Based Intumescent Basecoat

Key Benefits Summary • Water based intumescent coating suitable for internal use on structural steelwork for up to 120 minute fire resistance • Easier to apply product for greater efficency on site with improved smooth matt finish • Compatible with a full range of Nullifire primers and top seals • Very low VOC read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

NULLIFIRE SC902 Fast Track Intumescent Coating

Nullifire SC902 is a fast track on or off-site, low VOC, one coat high build system capable of providing up to 2 hours protection in a single coat Two component, fast cure, early weather resistance, shower proof within 1 hour Achieves external durability with an approved top seal Cures below read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Nullifire S605

A solvent borne intumescent coating designed for fire ratings up to an hour. Nullifire provides a surface that is readily overcoated with a selection of architectural and protective finish coats. read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Nullifire SC802 Waterborne Intumescent Basecoat

SC802 Intumescent Basecoat is a white thin film intumescent coating for the fire protection of internal structural steelwork. SC802 provides effective structural fire protection, for steelwork, up to a 60 minute fire rating. SC802 is designed for on-site application BENEFITS Water based intumescent coating suitable for internal use  on structural steelwork engineered read more »

Availability: - New Zealand

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Pro~Seal Intumescent Seal Coat

A single pack, fast dry sealer designed to offer weathering protection to solvent borne intumescent coatings. Once cured this seal coat may be overcoated with two component polyurethanes. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

Pyrocrete 40

Cementitious inorganic polymer fireproofing formulation. Single powder component mixed with clean, potable water before it is used in application. Recommended uses for the fire protection of structural steel, bulkheads, and upgrading the fire resistance of any existing concrete. Recommended areas of application are petrochemical plants, pharmaceutical facilities, power plants, schools read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Southwest Type 5GP

Cementitious, noncombustible, inorganic fireproofing supplied as a single powder component that is mixed with clean, potable water prior to application Southwest Type 5GP is intended for application to interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Thermo-Lag 3000 SP

A two component, epoxy based, thermally activated, intumescent coating for the fire protection of structural steel. Thermo-Lag® 3000 SP is designed to fireproof steelwork for up to a 4 hour fire rating, depending on the design. The recommended use for this product is fireproofing of steel beams, columns, tubes, pipes, read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Thermo-Lag 3002

A two component, epoxy based, thermally activated, intumescent coating which is primarily spray applied directly over Thermo-Lag® 3000 series EPFP. Thermo-Lag® 3002 provides a hard, durable duplex system that allows for the reduction of coating thickness in a jet fire environment as well as enhanced environmental resistance     read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet