Pipelines and Terminals

view case history

Altra~Lock 576

Altra~Lock® 576 is designed for use as a surface  sealer, conditioner and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods. May be overcoated with a wide range of build and/or finish coats.   Altra~Lock® read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Altra~Tar

Altra~Tar® may be used in all Industrial & Marine applications where coal tar epoxy coatings are traditionally specified. Marine & Immersion Service Ships, barges, floating docks, offshore structures - Non-bleeding formulation makes Altra~Tar® equally suited to under and above water service Economical anti-corrosive & barrier coating under anti-foulings Industrial clarifiers read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 2929

Proprietary cross-linking epoxy-acrylic gloss finish Fast cure iso-cyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable. Isocyanate free Early through-curing Excellent colour and gloss retention with good chalking resistance Lead and chrome-free colour range Good chemical resistance Excellent durability read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 504

Carboguard® 504 is an inert non-inhibitive anti-corrosive modified polyamide cured epoxy primer. Excellent primer for water and many aqueous chemicals immersion service when top-coated with an approved finish Excellent adhesion to difficult substrates Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, 2 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 504 ZP

Carboguard® 504 ZP is a zinc phosphate modified inhibitive anti-corrosive polyamide cured epoxy primer Carboguard® 504 ZP may be applied over suitably prepared mild steel, non-ferrous metals and other substrates as specified Excellent adhesion Excellent holding primer Excellent corrosion resistance Complies with AS/NZS 3750.13 (2 pack epoxy primer), Types 1, read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 635 HAR

A rapid cure to topcoat epoxy with high abrasion resistance along with other valuable attributes including: low-temperature cure surface tolerance fast recoat times moisture tolerance during application and cure excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 636

A highly versatile multi-purpose Phenalkamine Epoxy High Build coating. Carboguard® 636 is an advanced technology coating suited to marine and industrial applications and suitable for atmospheric and many immersion exposures. The DTM properties make Carboguard® 636 a versatile coating in maintenance and new work applications. Syntactic foam modification gives Carboguard® read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690

High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Fully tintable epoxy high build Suitable for all industrial and marine environments. Carboguard 690 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690 GF

Phenalkamine Epoxy with Glass Flake Additive to increase chemical, abrasion & thermal shock resistance High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 690 Non-Skid

Phenalkamine Epoxy with Non-Skid Additive High performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used as required on decks, walkways etc read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet 

Carboguard 695 CLR

Carboguard 695 CLR is a solventless, clear, epoxy lining that can be applied using reinforced mat specifically designed to comply with API RP652** for thick-film tank bottom lining repairs. It is suitable for exposures in water, crude oil, aromatic distillates, and unblended gasolines. It is suitable for exposures in water, read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 695 PM

Carboguard 695 PM is a solventless, epoxy surfacer or patching mortar that is used to: Fuel & Other Tanks: Transition between floor-wall chine areas, lapwelded plates, rivets, etc. It is typically used with a reinforced mat system specifically designed to comply with API RP652 for thick-film tank bottom lining repairs. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 696 UHBE

Carboguard® 696 UHBE is a phenalkamine cured, high solids, syntactic foam modified high build epoxy coating. Carboguard® 696 UHBE is designed for application to system film thicknesses typically ranging from 800 microns to 3 millimetres (3000 microns). Ultra-High Build – 0.8mm to 2 mm in a single coat Potable Water read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 890

Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions Excellent chemical resistance Surface read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  Aus. Safety Data Sheet

Carboguard 890 GF

Cycloaliphatic Amine Epoxy with Glass Reinforcement A glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboguard 893

High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbomastic 615 Aluminium Grey

This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal. It contains read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbomastic 615 MIOX

This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal. It contains read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbothane 133 LH

Aliphatic Acrylic-Polyester Polyurethane Satin Finish High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours Outstanding performance properties in both mild and read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbothane 134 HG

High gloss polyurethane finish with exceptional weathering performance characteristics. Used extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure. Specialised UV protection designed for Australian and New Zealand exposures Highly recoatable, with read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbotherm 3300

Carbotherm 3300 is a ceramic blend insulative composite coating formulated using a high temperature resistant acrylic binder. It is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keep structures exposed to read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carboweld 11

Self curing, zinc filled inorganic weldable holding primer. A weldable inorganic zinc primer, which is both self curing and weldable. Welds made over Carboweld 11 coated steel are equal in every respect to welds joining uncoated steel prior to fabrication. Weld spatter does not adhere to or damage the coating. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbozinc 11

Time-tested corrosion resistant primer that protects steel galvanically in the harshest environments. For over four decades, Carbozinc 11 (CZ 11) has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide   CZ 11 meets Class B slip co-efficient and creep testing criteria for use on faying read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbozinc 11 WB

Carbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats   Excellent corrosion protection High zinc read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbozinc 858

Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications   Meets SSPC Paint System read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Carbozinc 859 EZ2

A very economic, two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. Carbozinc 859 EZ2 can be applied by conventional, airless, or plural component spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include structural steel, tanks, read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Chem~Bar 3500

Chem~Bar™3500 Primer is a single pack steel primer designed for use in industrial and marine applications. For atmospheric exposures, Chem~Bar 3500™Primer is normally topcoated with Chem~Bar 900™Finish.   Chem~Bar 3500™Primer may be: Applied directly over steel or over zinc primers such as Carbozinc® 859 EZ2, Carbozinc® 858, Zinkex 100 or read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Chem~Bar 900

Chem~Bar 900™ is specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals. Chem~Bar 900™ may be used to protect structural steel, tanks, pipes and equipment a vast range of industries. It's recoatable properties, highly anti-corrosive formulation and ease of application make it an ideal coating read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Chem~Bar 900 Aluminium MS Sealer

Metal Spray Sealer - a traditional Vinyl sealer used in accordance with ASNZ2312 Zinc Metalspray systems, as well as a single package high performance aluminium filled vinyl-acrylic finish suitable for use as a general purpose aluminium finish. Chem~Bar 900™ Aluminium may be used in all atmospheric exposures where traditional aluminium read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

E~Line 239

E~Line® 239 is a high performance, acrylic polyurethane which will provide excellent gloss and colour retention as well as resistance to moderate/severe corrosive environments for structures equipment and fixtures. E~Line® 239 is recommended for use on: Electrical Switchboards Heavy duty earthmoving equipment Industrial equipment, conveyors, compressors, Pipework etc Structural Steel Forkhoists and read more »

Availability: - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

E~Line 379

E~Line 379® is a high gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required. E~Line 379® will provide excellent gloss and colour retention as well as resistance to moderate to severe corrosive environments for: Transportation industry Chemical read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Filler #50

Graded silica blend for epoxy putty / mortar mixes read more »

Availability: - New Zealand - Australia

View More  Enquire  Aus. Safety Data Sheet

Glass Flake Additive

Reinforcing additive for a range of Carboguard epoxy coatings read more »

Availability: - New Zealand - Australia

View More  Enquire  NZ Safety Data Sheet  Aus. Safety Data Sheet

Intumastic 285

Single package, water-based, flexible mastic fire protective coating for cables and cable trays. A water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Phenoline 1205

A glass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. Phenoline® 1205 exhibits very good acid resistance. Excellent for lining tanks or pipes in process facilities where hot water or read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Phenoline 341

Phenoline 341 is a solventless, epoxy lining for a variety of cargoes including water, potable water, wastewater, seawater, fuels, crude oils, and other solutions. Single coat, high performance protection. Easy to apply by standard equipment. Excellent chemical resistance. Fast cure. Tough abrasion resistant film Tested and approved to AS 4020:2005 read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Phenoline 353 LTE

High solids modified novalac epoxy, with excellent low temperature cure and outstanding chemical resistance. Provides immersion grade service for a vast range of chemicals (refer Data Sheet)  in a wide range of industries:   Wastewater Petrochemical Industrial manufacturing / processing Chemical transport   read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Phenoline Tankshield

Amne Adduct cured epoxy read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet 

Reactamine 760

Reactamine 760 is a solvent free aromatic hybrid polyurethane elastomeric membrane. Environmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for potable water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Reactamine Joint Seal

Reactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self-leveling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and breakdown. This product can be applied at temperatures read more »

Availability: - New Zealand - Australia

View More  Enquire  NZ Safety Data Sheet  Aus. Safety Data Sheet

Thermaline 4700 Aluminium

High-performance finish for areas exposed to extreme temperatures. Suitable for continuous service from 204°C-540°C and surges to 650°C.  Heat curing will result in full film formation properties. read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet  Aus. Safety Data Sheet

Zinkex 100

Zinkex 100 is an excellent primer for chlorinated rubber and vinyl finish coats. It may be used as a “cold galvanising” coating for the repair of hot-dip galvanised surfaces. Zinkex 100 may be left untopcoated in non-corrosive atmospheres. Zinkex 100 is suitable for maintenance use in the following areas: Chemical read more »

Availability: - New Zealand - Australia

View More  Enquire  Product Data Sheet  NZ Safety Data Sheet